Get Your Pool Summer-Ready This Spring

As the weather warms up and the days grow longer, there’s nothing better than diving into a clean, refreshing pool. But before you throw on your swimmers and fire up the barbecue, it’s important to get your pool in top shape for the season ahead.

Reopening your pool after winter isn’t just about removing the cover and turning on the pump. A little preparation now will help ensure a safe, healthy swimming environment for your family and prevent costly repairs later on. From getting your equipment in check to maintaining water balance through the peak of summer, this guide will walk you through everything you need to know to enjoy a stress-free swimming season.

Opening Your Pool for the Swimming Season

As the weather begins to warm and the days get longer, it’s time to get your pool ready for another summer of fun. Reopening your pool properly ensures clean, safe water and protects your equipment for the months ahead. Here’s how to prepare your pool for the swimming season with confidence.

Remove and Store Your Pool Cover

Start by clearing any standing water off the cover, being careful not to let it drain into the pool. Sweep away leaves and debris, then give the cover a thorough clean following the manufacturer’s instructions. Allow it to dry completely before storing it in a clean, dry area. With the cover removed, give your pool a solid clean – brushing the walls and floor and vacuuming to remove built-up grime.

Check the Water Level

Ensure the water level sits halfway up the skimmer opening to allow for proper circulation. If it’s too low, top it up with fresh water. Take a moment to inspect all fittings and equipment for any signs of leaks or wear. If you notice anything unusual, consult your local SPASA member for professional support.

Inspect and Clean Your Equipment

Before turning everything back on, clean out the skimmer basket, pump basket and filter. Check your pump and filtration system to make sure they’re functioning as they should. If it’s been a while since your last service, consider booking a licensed pool and spa technician to perform a complete system check. Once everything is cleaned and in working order, restart your circulation system and run it for 24 to 48 hours to help clear the water.

Bring in a Water Sample

Before you start swimming, take a fresh water sample to your local SPASA member for a professional water test. Collect your sample from elbow depth in a clean container for the most accurate results. This test will help you balance your pool water properly and identify if any additional treatment is needed.

Test Sanitiser and pH Levels at Home

You can also use a home testing kit to keep track of your pool’s sanitiser and pH levels. For more guidance, visit our water quality page for tips on testing and adjusting your levels safely.

Maintaining Your Pool Through Summer

Once your pool is open and balanced, regular maintenance is the key to keeping it sparkling and safe all season long. Here are the essentials to include in your summer care routine:

Clean Baskets Weekly

Check and empty the skimmer basket and the pump’s hair and lint pot weekly. If your pool gets a lot of leaves or sees heavy use, you may need to do this more often.

Maintain Your Filter

Backwash sand or DE filters and clean cartridge filters regularly. Filter maintenance frequency depends on your pool’s usage and surrounding environment.

Monitor Sanitiser Levels

Test sanitiser levels daily, especially during periods of heavy use. Keep chlorine or sanitiser levels within the recommended range to prevent bacteria and algae growth.

Check Automated Systems

If your pool has a salt chlorinator or automatic dosing system, ensure it’s working correctly and adjust settings based on pool usage.

Keep an Eye on Water Balance

Test pH every two to three days and adjust as needed to maintain ideal levels. Total Alkalinity (TA) should be checked weekly and adjusted using a buffer such as sodium bicarbonate if necessary.

Run the Filtration System

Set your pool timer so the filtration system runs for at least six hours each day. This can be broken up into multiple shorter cycles to maintain consistent circulation.

Bring in Water Samples Regularly

Every two to four weeks during swimming season, take a water sample to your local SPASA pool shop to ensure your water chemistry stays in balance.

Top Up Salt if Needed

Salt chlorinated pools may require extra salt during the season. You may also need to adjust the chlorinator’s output as temperatures and usage increase.

Maintain Water Level

Keep your pool water level at least halfway up the skimmer box opening to help your circulation system function properly.

Check for Leaks

Regularly inspect your pool’s plumbing, fittings and equipment for signs of leaks. Addressing small issues early can prevent more costly repairs later.

Brush and Vacuum Weekly

To prevent algae and bacteria build-up, brush the pool walls and floor at least once a week and follow up with a vacuum to remove debris.

A Smooth Swimming Season Starts Here

With your pool open and these maintenance steps in place, you’ll be set for a summer of safe, clean and hassle-free swimming. A little regular upkeep goes a long way in protecting your pool equipment, maintaining water quality and ensuring everyone enjoys their time in the water.