Dimensions:

W3000 x L5920 x H2440mm

Materials:

Aluminium Legs:  110 x 110 x Thickness 1.3mm

Aluminium Beams:  140 x 77 x Thickness 1.30mm

Aluminium Louvres:  162 x 30 x Thickness 1.30mm Single Layer of aluminium.

Stainless Steel 4mm thickness feet plates with Stainless Steel corner covers

 Stainless Steel *Hardware     *(Some components are constructed with galvanised steel for added strength) 

Warnings. Please note.

These Louvred Roofed Pergolas are not a permanent structure.

– They are designed to be waterproof when louvres are closed. Rainwater runs off the Louvres
into the gutters and down through the legs. However, during heavy or torrential rain, some
rainwater may drip through.

– Keep Louvres open in high winds or stormy conditions to allow the wind to pass through,
reducing stress on the pergola.

-If Anti Wind Screens are attached, please slide up and stow in high wind or stormy conditions.

-Ideally stow the Anti Wind Screens when dry. If situation does not allow this at the closest time
after these have been stowed, slide down to allow to dry properly. This will help preserve the
performance and colour of the screen.

-Install on level ground.
Anchor legs with stainless steel feet plates (supplied) onto a solid level foundation. i.e thick concrete pad under each post or a reinforced timber deck.

-Not for Commercial use